TruGlu XD – Moisture-Cured Urethane Adhesive (4 Gallon)

Description

TruGlu XD adhesive is designed for a permanent, easy installation of rubber flooring, and various other flooring types including, but not limited to: engineered hardwood, cork, and bamboo (non strand woven). TruGlu XD is a one-part, pressure sensitive adhesive, that requires no stirring or mixing. The fast grab formula allows for light foot traffic within 4 hours and heavy foot traffic in 12 hours of installation.

Approved Subfloors:

• APA underlayment grade plywood and OSB
• Associated grade particleboard
• Cement backer board
• Cementitious and anhydrite screeds
• Concrete and radiant heated subfloors that do not exceed 30°C
• Existing well-bonded non-cushion-backed vinyl, tile, and sheet flooring
• Fully secured cork underlayment
• Gypsum and lightweight concrete (primed)
• Terrazzo (properly prepared with all waxes and surface finishes removed)

Cleaning: When adhesive is wet – use a damp cloth to remove excess glue from the product. If TruGlu XD urethane adhesive is dried, it can be removed with mineral spirits or a safe solvent. (Always check compatibility on a test piece of flooring first.)

Cure Time: 24 Hours

Working Time: 45-60 Minutes

Shelf-Life: 12 months

Storage: Product should be stored between 10-32°C (50-90°F). While the product is freeze-thaw stable, it is necessary to protect it from freezing.

RH: 75%

Coverage: 600-700 SF/Pail (depending on usage)